Watch Video!Step by Step Installation
Design engineer Pål walks you through the standard installation method of Dropracks onto a car.
We recommend to be two persons.
Make sure to read the instruction manuals before you get started, and this video is also very helpful.
Please note that the tiny plastic plugs are no longer part of the product. This tiny piece only applies to products mannufactured in 2019.
In This Video
▸Dropracks Sport Roof Rack
▸Atera Signo RTD - Flush rail clamps
▸Volvo XC40 2019
Installation Steps
1 - Assemble center bar (0:50)
2 - Attach Clamps (1:40)
3 - Choose side (2:34)
4 - Lift Dropracks onto car x 2 (2:56)
5 - Connect bar (4 short bolts) (3:48)
6 - Connect bar (2 long bolts) 4:40)
7 - Adjust and align (5:46)
8 - Tighten clamps (6:32)
9 - Perform alignment test (7:12)
10 - Connect handlebar (Left side) (8:05)
11 - Connect handlebar (Right side) (9:10)
12 - Crank the rack up (9:41)
13 - Inspect the locks (10:9)
14 - Congratulations!
Installation manual
Buy now
